Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eye

When All Samples Start with the Same Digits, the Unit Simply Discards Them

Published August 27, 2026 at 07:16

Seawater has a density just above one kilo per liter. Almost always. Whether the sample comes from the Baltic, the Atlantic, or a fish farm tank, the value falls somewhere around 1.02 kg per liter — which means the leading digits are the same every single time.

Numbers that never change carry no information. So oceanography did the only sensible thing: it stopped writing them out. Sigma-t is density expressed as the excess above 1000 kg per cubic meter — so 25.4 instead of 1025.4. Same number, but all the resolution now sits in the digits that actually vary.

Palm Abbe AQUAR H50 digital seawater refractometer

What it is

Palm Abbe AQUAR H50 — a digital seawater refractometer with five outputs.

  • Salinity in PSU (Practical Salinity Units)
  • Sigma-t density and density
  • Conductivity and chlorinity
  • Automatic temperature compensation
  • Scales based on UNESCO seawater research, not on pure sodium chloride

Five readings, one measurement

The instrument measures refractive index once. The five figures are five ways of expressing the same thing, and they exist because different disciplines have different habits: the fish farmer thinks in PSU, someone calculating stratification thinks in sigma-t, someone comparing against older literature needs chlorinity, and someone cross-checking against a probe reads conductivity.

Not having to convert between them is worth more than it sounds. Every conversion requires a formula and a temperature, and doing it by hand or in a spreadsheet introduces a source of error that stays there forever.

Why an ordinary salt refractometer won’t do

Seawater is not salt water. Sodium chloride is the largest component, but far from the only one — sulfate, magnesium, calcium, and a range of other substances are present too, and each contributes to the refractive index in its own way.

An instrument whose scale was built on pure saline solution will therefore read seawater wrong, systematically. It’s the same principle that applies everywhere a scale is empirical: the curve holds for the liquid it was derived from. The scales here are instead based on established seawater research, which is the entire difference between a number that looks plausible and one that’s correct.

What it replaces

Hydrometer: requires a tall sample cylinder, a still liquid column, and time for temperature equilibration — plus a reading that’s sensitive to the meniscus.

Chloride titration: gives a good value but is a wet chemical procedure with reagents, glassware, and waste.

Conductivity measurement: fast, but affected by temperature and by everything else dissolved in the water, and the electrode requires maintenance.

Against that stands a few drops on a prism and an answer in seconds, with temperature compensation built in. It’s not always the most precise method available — but it’s the one that can be done often, on site, by anyone.

Three typical use cases

  • Aquaculture and aquariums: daily salinity checks in tanks and systems.
  • Oceanography and fieldwork: measurements on board where no lab is available.
  • Desalination: monitoring incoming and outgoing water in the process.

Why it pays off

Salinity is rarely interesting as a single value. It’s interesting as a series: how it changes over the course of a day, between tanks, before and after an intervention. And a series requires the measurement to be cheap enough to take often.

That’s why the choice of method matters more than the last decimal place. A method that takes ten seconds becomes a routine; one that requires reagents and a sample cylinder becomes an event — and an event gives you points, not curves.

Read more about the Palm Abbe AQUAR H50 →

More news

All news