Published 13 November 2026 at 22:09
Two people measure the same water sample from a tank and get different salinity values. One uses a hydrometer that was read at the wrong temperature, the other a basic refractometer that shows ppt. Neither has made an obvious mistake, yet the results still can’t be compared. This is a common situation when seawater needs to be kept within a narrow range.
What the instrument is
Palm Abbe AQUAR is a digital refractometer for seawater, developed for oceanography, aquaculture, professional aquariums, desalination plants and marine research. You place a drop of the sample on the measuring surface and read the salinity directly on the display. The instrument is handheld and can be used at the tank, the basin or the intake.
The problem it solves
Many refractometers marketed for seawater are based on the assumption that only sodium chloride affects the refractive index. Sodium chloride is admittedly a main component, but seawater contains more dissolved substances, and the value then becomes misleading. The AQUAR series instead relies on the physical measurement standards for seawater published by Unesco, and the result is given in Practical Salinity Units rather than the older ppt.
In addition, temperature compensation is automatic. An analog refractometer gives a deviating value for every degree by which the sample or the instrument differs from 20 °C, and reading through the eyepiece is also subjective. A digital display removes interpretation from the measurement.
When and why it is used
The instrument replaces chloride titration, specific gravity with a hydrometer, and conductivity measurement in routine checks of seawater, salt water and brackish water. It suits situations where you need a fast, repeatable value without reagents, calibration solutions or lengthy preparation.
Three use cases
Aquaculture: In a hatchery or a recirculating system, salinity affects the health of fish and larvae. Daily checks of several tanks go quickly when each sample requires one drop and a few seconds.
Professional aquariums: With water changes and evaporation, salinity gradually drifts. With an instrument that reports PSU, you can document the values over time and compare between basins.
Desalination and marine research: At the intake, intermediate stages and outlet, you need values that are comparable between measurement occasions and between people. Field and laboratory measurements can then be made using the same method.
Why it pays off
The cost of salinity control rarely lies in the instrument but in the time and the consequential errors. Titration takes time and consumes chemicals. Hydrometers require temperature correction and are fragile. Incorrect salinity in a tank can lead to stressed animals, lost growth or a batch that has to be discarded. An instrument that delivers a temperature-compensated value in a few seconds reduces both working time and the risk of making decisions based on uncertain data.
Do you need to measure salinity in a way that holds up for documentation and comparisons? See the data sheet and details for Palm Abbe AQUAR.