Published August 27, 2026 at 23:12
A wine refractometer has a scale marked %ALC, and it looks like it’s promising something the instrument can’t do: measure alcohol. A refractometer measures refractive index and nothing else. It has no particular sensitivity to alcohol as such.
The scale is therefore not an alcohol measurement but a conversion. In an unfermented must, almost the entire refractive index comes from the sugar, and the sugar is in turn what can become alcohol. The number on the %ALC scale answers the question: how much alcohol could this potentially become?
What it is
A digital wine refractometer with multiple scales.
- Brix and sugar content in grams per liter
- %ALC — potential alcohol content
- Automatic temperature compensation 0 to +50 °C
- Stainless steel sample well with sapphire glass, hinged protective cover
- One-touch calibration against a few drops of pure water
Why the scale stops working once fermentation begins
As long as the must is unfermented, there is in practice one unknown quantity: the sugar. A single measurement is then enough to determine it, and therefore also to calculate how much alcohol it could yield.
As soon as fermentation has started, there are two unknown quantities in the liquid — remaining sugar and alcohol formed — and they affect the refractive index differently. A single measured value cannot determine two unknowns. It doesn’t matter how precise the instrument is; the information simply isn’t in the measurement.
This is why a refractometer belongs before fermentation, when planning, and why monitoring during fermentation is instead done with density measurement — or with a calculation based on both the starting value and a current value. Knowing where that limit lies is the difference between a useful instrument and a misleading one.
Brix and grams per liter are the same sugar content in two languages
Brix is percent by weight, grams per liter is mass per volume. They describe the same content, but they are not interchangeable with a fixed number — the conversion depends on the liquid’s density, which in turn depends on the sugar content.
The instrument showing both is therefore practical for the same reason a seawater refractometer shows salinity in multiple units: recipes, regulatory requirements and supplier specifications are written in different units, and a mental conversion is one more place where errors creep in.
Temperature compensation across 0 to 50 degrees
Must is rarely measured in a measurement room. It’s measured at the press, in the vessel, or out in the vineyard, where the sample may be warm from the sun or cold from the night. Compensation across that entire range means the reading can be taken where the sample is, rather than after it has been left to reach room temperature.
And the fact that calibration is done against pure water with a single button press means the check can be done the same day, on site — not as an annual event.
Three typical use cases
- Harvest decisions: ripeness monitoring in the vineyard, where sugar content determines the timing.
- Fermentation planning: determining the starting value and expected alcohol content.
- Raw material intake: checking must against agreed quality.
Why it pays off
Sugar content at harvest is one of the few numbers that affects everything that follows: alcohol content, balance, fermentation progress and shelf life. It also changes quickly in the final weeks, which means the harvest timing decision relies on measurements taken closely together.
An instrument that works with just a few drops and responds in seconds makes it possible to measure often and in many places — and it’s the spread between measurement points, not the individual value, that tells you whether the batch as a whole is ripe.