Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eye
Item number 52-IRIS

IRIS Intelligent Refractometer Probe for Refractive Index RI – Directly Mounted in Flow Process

Call for price

In stock

The IRIS process refractometer connects directly to industrial flows and indicates various concentrations in liquids.

Request a quote 52-IRIS
  • Free shipping on orders over 3000 kr excl. VAT
  • Refractometers from Misco, Atago and Extech
  • Call us +46 8 753 00 04

Category:

Description

How does an Inline refractive index sensor differ from an Inline refractometer?

Inline refractometers are, for the most part, best described as a “dumb sensor” cable-connected to an external controller. The proprietary control cabinet typically houses a display, which the user interacts with, and connections to external equipment, such as PLCs, computers, or other data acquisition units. Mounting the control box near the sensor takes up space, increases installation time, is an extra expense, and is yet another item to maintain or replace. There are generally few plumbing options because the Dumb Sensor is usually mounted in the main process flow and often requires special, often expensive, adapters.

The Dumb Sensor/Control Box model is a throwback to earlier days. In the new world of digital controls, few people look at the screen on the control panel. Most users simply want to connect a sensor to their network and read the measurements on their computer, HMI, or SCADA equipment. There is really no need for an external display in most installations.

Unlike conventional inline or process refractometers, the IRIS Inline sensor is a true “smart sensor” that operates completely independently of an external control unit. IRIS Inline is designed to connect directly to your control system with an analog 4 to 20 mA or 0 to 10 volt signal. In the event that you need a digital display, a low-cost bench meter can be added.

Flexible installation

As the name suggests, most inline refractometers are mounted “inline” with a process flow. Inline fittings often require special, often expensive, custom adapters, and the entire process must be shut down to remove part of the sensing head for cleaning or maintenance. The IRIS Inline sensor is easily connected to a bypass flow, parallel to the main process, using common off-the-shelf hardware.

Instead of the sensor forcing you to adapt your process to the sensor, the MISCO IRIS Sensor is easily integrated into your process. Two push-to-connect I/O ports on the front of the flow-through adapter make it easy to connect the IRIS sensor to almost any type of process. These 5/16” (8mm) ports accommodate an almost unlimited number of common, inexpensive, ready-made connectors and adapters.

Here are just a few connection options:

• 5/16” flexible hoses can be run straight into one of the push-to-connect I/O ports and out through the other.

• Two right-angle elbows, one short and one long, can be inserted into the I/O ports and provide 360° rotation so that lines can come in from all angles.

• The 5/16” push-to-connect adapter can expand to accept 3/8” flex hose and can reduce to ¼”, 3/16”, or 5/32” hose.

• The 5/16” push-to-connect adapter converts to 1/8” or ¼” NPT-M, 10-32 UNF, BSPT or BSPP.

• ¼” NPT-M mounting can connect with a number of sizes of NPT pipe fittings.

• 5/16” push-to-hose coupling to ¼” hose nipple.

Whether you are running steel pipe, flexible hose, tubing, or pipe, there is likely a quick push-to-connect adapter for your needs.

How to install

Installation is quick and simple.

1. Screw the bracket to C-Channel, Unistrut, or another suitable location.

2. Run lines to the flow-through adapter.

3. Run the sensor cable from the PLC or data acquisition unit to the sensor bracket.

4. Configure the sensor: When you first receive your IRIS, configure it to your needs with MISCO Inline Connect (included). Connect the sensor to the USB port on your computer and run the program. Configuration is very simple!

5. Connect the sensor and flow-through adapter. Requires a ¼ turn and locks in place. No tools needed.

6. Screw the sensor cable onto the back of the IRIS and you are ready to go.

*The sensor is supplied with a special configuration program. Requires a computer running the MS Windows operating system and a USB port.

Specification

How does an Inline refractive index sensor differ from an Inline refractometer?

Inline refractometers are, for the most part, best described as a “dumb sensor” cable-connected to an external controller. The proprietary control cabinet typically houses a display, which the user interacts with, and connections to external equipment, such as PLCs, computers, or other data acquisition units. Mounting the control box near the sensor takes up space, increases installation time, is an extra expense, and is yet another item to maintain or replace. There are generally few plumbing options because the Dumb Sensor is usually mounted in the main process flow and often requires special, often expensive, adapters.

The Dumb Sensor/Control Box model is a throwback to earlier days. In the new world of digital controls, few people look at the screen on the control panel. Most users simply want to connect a sensor to their network and read the measurements on their computer, HMI, or SCADA equipment. There is really no need for an external display in most installations.

Unlike conventional inline or process refractometers, the IRIS Inline sensor is a true “smart sensor” that operates completely independently of an external control unit. IRIS Inline is designed to connect directly to your control system with an analog 4 to 20 mA or 0 to 10 volt signal. In the event that you need a digital display, a low-cost bench meter can be added.

Flexible installation

As the name suggests, most inline refractometers are mounted “inline” with a process flow. Inline fittings often require special, often expensive, custom adapters, and the entire process must be shut down to remove part of the sensing head for cleaning or maintenance. The IRIS Inline sensor is easily connected to a bypass flow, parallel to the main process, using common off-the-shelf hardware.

Instead of the sensor forcing you to adapt your process to the sensor, the MISCO IRIS Sensor is easily integrated into your process. Two push-to-connect I/O ports on the front of the flow-through adapter make it easy to connect the IRIS sensor to almost any type of process. These 5/16” (8mm) ports accommodate an almost unlimited number of common, inexpensive, ready-made connectors and adapters.

Here are just a few connection options:

• 5/16” flexible hoses can be run straight into one of the push-to-connect I/O ports and out through the other.

• Two right-angle elbows, one short and one long, can be inserted into the I/O ports and provide 360° rotation so that lines can come in from all angles.

• The 5/16” push-to-connect adapter can expand to accept 3/8” flex hose and can reduce to ¼”, 3/16”, or 5/32” hose.

• The 5/16” push-to-connect adapter converts to 1/8” or ¼” NPT-M, 10-32 UNF, BSPT or BSPP.

• ¼” NPT-M mounting can connect with a number of sizes of NPT pipe fittings.

• 5/16” push-to-hose coupling to ¼” hose nipple.

Whether you are running steel pipe, flexible hose, tubing, or pipe, there is likely a quick push-to-connect adapter for your needs.

How to install

Installation is quick and simple.

1. Screw the bracket to C-Channel, Unistrut, or another suitable location.

2. Run lines to the flow-through adapter.

3. Run the sensor cable from the PLC or data acquisition unit to the sensor bracket.

4. Configure the sensor: When you first receive your IRIS, configure it to your needs with MISCO Inline Connect (included). Connect the sensor to the USB port on your computer and run the program. Configuration is very simple!

5. Connect the sensor and flow-through adapter. Requires a ¼ turn and locks in place. No tools needed.

6. Screw the sensor cable onto the back of the IRIS and you are ready to go.

*The sensor is supplied with a special configuration program. Requires a computer running the MS Windows operating system and a USB port.

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *