Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eye

Same Liquid, Different Brix: Temperature Shifts the Reading, and That’s Why ATC Exists

Published August 23, 2026 at 09:46

Two people measure the same liquid, from the same container, with the same instrument — and get two different values. Neither of them made a mistake. One measured right after the sample was taken out of a refrigerator, the other half an hour later after it had been sitting on the bench. The difference is real, it’s predictable, and it’s the reason the letters ATC appear on the instrument.

Handheld optical refractometer 0-10 % Brix with automatic temperature compensation

What it is

A compact handheld optical refractometer with a narrow measuring range and built-in temperature compensation.

  • Measuring range 0 to 10 % Brix — sugar content in fruit juice and industrial liquids
  • Automatic temperature compensation (ATC) from 10 to 30 degrees C
  • Requires only 2 to 3 drops of sample
  • Prism and lens are easy to adjust
  • Supplied complete with case, calibration screwdriver, plastic pipette and calibration solution

The problem it solves

A refractometer doesn’t actually measure sugar. It measures how much the light bends as it passes through the interface between the prism and the liquid, and converts that into a Brix scale. The problem is that the refractive index of water and sugar solutions changes with temperature — the liquid becomes less dense when heated, the light bends slightly less, and the scale shows a lower value. Brix tables are defined at a reference temperature, and every degree away from that is a systematic error that no zero-point recalibration can fix.

ATC performs the compensation mechanically, not in the user’s head. A bimetallic element inside the instrument shifts the optics as the temperature changes, so the reading always corresponds to what the sample would have shown at the reference temperature. The alternative — measuring the sample’s temperature, looking up a correction table and recalculating each reading by hand — works in a laboratory, but not in a production setting where the measurement needs to take ten seconds.

The narrow range is the other half of the same point. An instrument covering 0 to 90 % Brix has to squeeze a range nine times as large onto the same scale, and in the low range every graduation becomes coarse. When what needs to be monitored is below 10 % — diluted juices, rinse water, process liquids, cutting fluid and coolant mixtures — a 0 to 10 instrument gives a considerably finer division over exactly the range that matters. A wide-range instrument is more flexible; a narrow one is more readable where it counts.

Three typical use cases

  • Food and beverage: checking diluted juices, cordial, rinse water and return flows where the sugar content needs to be kept low and consistent.
  • Manufacturing industry: concentration in cutting fluid and coolant mixtures, where too weak a mixture causes tool wear and too strong causes skin irritation and unnecessary cost.
  • Cleaning and process water: quick spot checks right at the tank, without sending samples to a lab.

Why it pays off

The cost of an inaccurate concentration measurement rarely shows up in the measurement log. It shows up in a batch that has to be adjusted afterward, in an emulsion that’s been dosed too generously all week, or in two shifts that don’t trust each other’s numbers because the values never match. When the deviation is also caused by temperature, it’s insidious: it varies with the season, with where the sample was taken and with how long it’s been sitting.

An instrument that compensates automatically removes exactly that source of error — and it only takes a few drops and a few seconds to make the check cheap enough that it actually gets done.

Read more about the 0-10 % Brix refractometer with ATC →

More news

All news