Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eye

ATAGO SugarMaster PR-301α, 45-90% Brix, ±0.1% Accuracy: When Honey and Marmalade Concentrate Call for a Refractometer at the Opposite End of the Spectrum

Published July 6, 2026 at 07:38

Handheld Brix refractometers are, in practice, divided into two categories: low-range models (0-32% Brix, for beverages and juices) and high-range models (45-90% Brix, for concentrates, honey and sugar syrup). The universal 0-90% model also exists, but it compromises accuracy at both ends in favor of covering the whole spectrum. For operators who consistently work above 45% Brix — honey producers, marmalade factories, concentrate manufacturers and sugar syrup refineries — a dedicated high-range model delivers twice the accuracy at the same price.

What the ATAGO SugarMaster PR-301α is

ATAGO SugarMaster PR-301 ALPHA is a digital handheld refractometer designed specifically for high-concentration Brix measurement. The instrument:

  • Measures Brix from 45.0% to 90.0% — the range where concentrated sugar solutions fall.
  • Has an accuracy of ±0.1% Brix — twice as good as typical universal models’ ±0.2%.
  • Uses automatic temperature compensation (ATC) between 5°C and 40°C.
  • Features a digital LCD display with one-button measurement.
  • Is IP-rated for workshop use and wet processes.
  • Has a prism plate that is rinsed off after each measurement.

Basic specifications:

  • Measurement range: Brix 45.0 – 90.0%
  • Accuracy: ±0.1% Brix
  • Resolution: 0.1% Brix
  • Temperature compensation: Automatic (ATC) 5-40°C
  • Sample volume: 0.3 ml (a few drops is enough for a thick solution)
  • Measurement time: ~3 seconds
  • Display: Digital LCD
  • Calibration: Single-point (pure water also works for high-range instruments via extrapolation)
  • Protection rating: IP-rated for wet environments

ATAGO SugarMaster PR-301 ALPHA digital refractometer 45-90% Brix

Honey — the classic application that determines market price

Honey quality classification under EU Directive 2001/110 (implemented in Sweden as SFS 2003:794, the ”Honey Ordinance”) sets strict requirements for water content:

  • Standard honey: Max 20% water (i.e., at least 80% dry matter, refractometrically ~80% Brix after the correction table).
  • Heather honey (Erica honey): Max 23% water due to its natural water content.
  • Baker’s honey: Max 25% water.

For a beekeeper or honey producer, this means every batch must be measured before jarring. The consequences of missing the threshold are significant:

  • Honey with >20% water can start to ferment (the yeast naturally present in pollen activates at higher water content).
  • Fermented honey loses its shelf value and becomes unfit for consumption.
  • Premature jarring (before the bees have dried the honey to <20%) ruins the value of the entire batch.

Refractometric measurement of honey: a drop of honey on the prism, press ”measure,” the display shows the Brix value. Water content = 100 – Brix (with a minor correction per the AOAC method). The PR-301α’s ±0.1% accuracy means the boundary between ”approved” and ”too moist” (Brix 80.0 ±0.1%) can be verified in a way a ±0.2% model cannot.

Sugar solution tables and Brix-to-dry-matter conversion

”Brix” as a scale was originally defined as the weight percentage of sugar solution that gives the same refractive index as the sample. For pure sugar solutions (sucrose in water), Brix = weight percent sugar directly. For other substances (glycol, salt, alcohol, honey), the Brix value gives an indirect figure that requires conversion via industry-standard tables:

  • Honey: Brix + 0.25% correction gives dry matter.
  • Fruit juices: Brix ~ sugar content (minor correction for organic acids).
  • Marmalades: Brix ~ dry matter (fruit sugar and sucrose dominate).
  • Coolant (ethylene glycol): Brix converted to volume percent glycol via a glycol table.
  • Salt solutions: Brix converted to weight percent NaCl via a specific table (used for preservation and salted products).

Where 45-90% Brix is the right choice

Honey production: Standard use for verifying water content before jarring.

Marmalade and jam production: Final product at 65-72% dry matter. Under-concentration causes fermentation; over-concentration causes crystallization.

Sugar syrup refineries: Finished syrup at 65-77% Brix. Used both in production and QC verification at dispatch.

Fruit concentrate manufacturing: From fresh juice (10-14% Brix) up to concentrate (65-70% Brix) via evaporation steps. The final product is measured to verify correct concentration.

Condensed milk and coffee creamer: Sweetened condensed milk at ~55% Brix. Unsweetened falls outside the range.

Coolant concentrate (glycol diluted 50:50): Fresh coolant straight from the container is at 47-52% Brix depending on manufacturer. Checked before refilling.

Industrial sugar production: Molasses, treacle, invert sugar syrup. All fall within the 45-90% Brix range.

Pharmaceutical industry: Sugar-based cough medicines, syrup base for children’s medicines. Concentration control for dosing consistency.

Ethyl alcohol-containing concentrates: Liqueur base, wine concentrate, cordial concentrate. Refractometric measurement combined with density measurement for combined quality control.

Practical considerations for high-concentration measurement

High-concentration solutions are physically different from water-based solutions and require adapted handling:

  • Thick-flowing materials: Honey, marmalade and concentrate flow slowly. Place the sample on the plate with a spatula, not a pipette. Wait 5-10 seconds for the sample to settle before measuring.
  • Crystallization: Honey that has sat for a long time can partially crystallize. For accurate measurement, warm the sample to 40-50°C, mix, and measure within the ATC range.
  • Cleaning: Dried honey on the prism surface is hard to remove. Immediately after measuring, rinse the prism with warm water and dry with a soft cloth.
  • Temperature stratification: Thick samples can have internal temperature differences. Mix before measuring.
  • Calibration reference: Standard sugar solution at 60.0% Brix as a reference material for monthly QC verification.

What you get for your money

ATAGO SugarMaster PR-301 ALPHA digital refractometer, measurement range Brix 45.0-90.0%, accuracy ±0.1% Brix, resolution 0.1% Brix, automatic temperature compensation 5-40°C, sample volume 0.3 ml, measurement time ~3 seconds, digital LCD display with one-button measurement, integrated prism, IP-rated housing for wet environments.

17,130 kronor is the instrument investment. Compared to an analog 45-90% Brix refractometer (1,000-3,000 kr, ±0.2% Brix, requires daylight and visual reading), the PR-301α delivers digital repeatability, ATC without operator calculation, and documentation traceability. Compared to a universal digital refractometer 0-90% Brix (10,000-25,000 kr, ±0.2%), the PR-301α delivers twice the accuracy in the high-concentration range where honey and concentrate quality control is actually performed. For a honey producer grading 500 kg of honey per batch, the price difference between ”too moist” and ”approved” is greater than the cost of the instrument.

Read more: ATAGO SugarMaster PR-301 ALPHA in the store →

More news

All news