Hoppa till innehåll
Free shipping on orders over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Why a Standard Brix Refractometer Shows the Wrong Sugar Content in WortThe Right Sugar Content in the Wort and the Right Antifreeze Protection in the Cooling System Can Be Measured with the Same InstrumentWort and glycol circuits can be checked with the same instrument if the refractometer has the right scalesSeawater Salinity Readings Go Wrong When the Instrument Only Counts Sodium ChlorideWhy the Brix Value Gives the Wrong Sugar Content in Wort, and How the Same Instrument Checks the Glycol in Your Cooling SystemSugar content in the sample changes with temperature, and you only notice when the batch is offSame sample, different sugar reading: how temperature-compensated refractometry ends the debateWhy measure in Brix when the liquid isn’t made of sucrose?A Few Drops Are Enough to See Whether the Concentration of the Liquid Is RightSame sample, same value: why a digital refractometer gives more reliable Brix measurement than reading by eye

Palm Abbe Digital Refractometer with 2 Custom Scales: When Your Process Fluid Isn’t Covered by the Standard Tables and a Factory-Calibrated Curve for YOUR Specific Concentrate Is the Only Way to 3-Second Concentration Measurement

Published July 14, 2026 at 5:46 AM

Refractometer technology works by measuring a liquid’s refractive index (nD) and converting it into a user-friendly unit via a LOOKUP TABLE. For sugar content, the table is Brix (International Commission for Uniform Methods of Sugar Analysis, ICUMSA). For ethylene glycol, it’s a volume-% or freezing-point table. For honey, it’s the moisture-content table (National Honey Board).

All these tables are standardized, publicly available, and pre-programmed into standard refractometers. But what if your process liquid isn’t in any standard table?

When standard tables aren’t enough

Industrial processes use thousands of unique chemical mixtures without standardized Brix-like tables:

  • Chemical industry: Ammonium sulfate in catalyst plants (SCR), ammonium chloride in galvanizing baths, lithium chloride in air conditioning plants (as a desiccant), lanthanum nitrate in optical polishing.
  • Pharmaceuticals: Active ingredients in aqueous formulations where concentration monitoring during production is critical.
  • Clinical medicine: Creatinine, urea, glucose concentration in biological reference fluid.
  • Water treatment: Magnesium chloride in de-icing fluid, iron chloride in flocculation processes.
  • Metallurgical processes: Electrolyte bath concentrations, rinse water contamination levels.
  • Paper industry: Cellulose slurry concentrations, liquor recovery process fluids.

For all of these, physical-chemistry literature exists showing how refractive index varies with concentration for specific mixtures — but no standard refractometer has these tables built in.

Custom factory calibration

Palm Abbe with 2 custom scales solves this by shifting the customization work to the FACTORY. At the time of ordering, you specify:

  1. Which two chemical substances the instrument should measure.
  2. Concentration range and desired unit (weight %, molarity, density, saturated concentrate).
  3. Temperature reference for measurement (typically 20 °C or 25 °C).

Termometer.se sends the information to the manufacturer (MISCO Refractometer), which:

  1. Looks up the refractive-index-vs-concentration table for the specific substance from physical-chemistry literature.
  2. Converts the table into a polynomial function that fits Palm Abbe’s microprocessor.
  3. Programs the function as one of the 2 custom scales.
  4. Verifies the calibration with reference solutions in the manufacturer’s calibration lab.
  5. Ships the instrument with a calibration certificate.

Time from order to delivery: 2-4 weeks for special calibration. Standard Brix variants ship from stock in 2-5 days.

Example customizations for different industries

Automotive industry — car battery electrolyte: H₂SO₄ (sulfuric acid) in water, concentration range 20-40 vol-% or specific gravity 1.15-1.30 g/mL. Monitoring battery lifespan via electrolyte density drift.

Photo lab / graphics industry (classic): Silver nitrate, hypo fixer, developing fluids. Still used today for traditional film development in art and cultural heritage preservation.

Leather industry: Chromium sulfate tanning baths, concentration range 5-15%. Monitoring tanning process efficiency.

Semiconductor manufacturing: HF etching baths, HNO₃ cleaning baths, concentration range 1-50% depending on process step.

Surface treatment / galvanizing: Nickel, copper, zinc sulfate baths. Continuous monitoring of bath concentration for consistent plating thickness.

Environmental sampling: Salinity in sea estuaries (more detailed than marine standard salinity), concentration of specific solutions in groundwater monitoring.

Nuclear power: Boric acid concentration in primary circuit water (used as a neutron absorber). Verifying that concentration stays within operating requirements.

The physics behind the refractive-index-concentration relationship

The refractive index of a liquid solution is determined by molecular density and molecular polarizability according to the Lorenz-Lorentz equation:

(n² – 1) / (n² + 2) = (ρ / M) · N_A · α / 3ε₀

Where n is refractive index, ρ is density, M is molar mass, N_A is Avogadro’s number, α is molecular polarizability, ε₀ is vacuum permittivity.

Practical consequence: for low concentrations (below 20%), the relationship between nD and concentration is LINEAR — easy to interpolate. For higher concentrations, the relationship becomes NON-LINEAR, and a polynomial function (typically cubic or quartic) is needed for <0.1% accuracy.

Palm Abbe’s microprocessor is powerful enough to calculate cubic polynomials in real time, giving fast (2-3 second) readings even for non-linear systems.

Two scales per instrument

Why 2 custom scales and not 1?

Many practical applications require monitoring two parameters:

  • Process control: The instrument measures both the active component AND an unwanted contaminant. E.g., in galvanizing: nickel concentration + chloride ion contamination.
  • Temperature correction: One scale for measurement at 20 °C reference, another for 25 °C — switchable without recalibration.
  • Different units: Ammonia in weight-% on scale 1, the same ammonia in molar concentration on scale 2 — the same measurement, two different unit interpretations for different departments (production vs. analytical lab).
  • Backup: One scale for normal operating values, the other scale for extended range during disruptions.

Titanium well for corrosion resistance

Standard refractometers have a sample well in stainless steel or aluminum. Many industrial chemicals corrode these materials:

  • Chlorides (sodium chloride, ammonium chloride): attack stainless steel over time.
  • Acids (HCl, H₂SO₄, HNO₃): more aggressive corrosion.
  • Alkalis (NaOH, KOH): attack aluminum.

Palm Abbe with custom scales ships with a TITANIUM WELL as compensation, since many customers measure more aggressive liquids. Titanium is resistant to most industrial chemicals except fluorides and concentrated hot oxidizing acids.

Automatic calibration with water

All Palm Abbe models are calibrated with DISTILLED WATER (nD = 1.3330 at 20 °C). Even for custom scales, water is the only calibration reference required — the polynomial function adjusts automatically.

Practical consequence: the user does NOT need to:

  • Buy expensive calibration solutions (can cost 500-3,000 SEK per scale).
  • Have chemical expertise to prepare reference solutions.
  • Worry about the shelf life of reference solutions.

Only distilled water (~10 SEK per liter) and a dropper are needed.

Automatic temperature compensation 0-50 °C

The ATC algorithm is calibrated specifically for the selected custom scales. This is an important difference from generic Brix instruments that assume sugar-solution coefficients (~ -0.0004 nD/°C).

Different chemicals have different temperature coefficients:

  • H₂SO₄: -0.00035 nD/°C.
  • Ethylene glycol: -0.00040 nD/°C.
  • NaCl: -0.00030 nD/°C.
  • Creatinine (biological): -0.00025 nD/°C.

Factory-programmed calibration uses the correct temperature coefficient for your chosen chemical, giving fully temperature-independent measurement in the range 0-50 °C.

Ordering procedure

  1. Contact Termometer.se with the specification: chemical name, desired measurement range, desired unit, reference temperature.
  2. Termometer.se sends a quote including technical verification that the calibration is possible (some chemicals have too low refractive-index sensitivity to work).
  3. Upon order approval: 2-4 weeks lead time for factory calibration.
  4. Delivery including calibration certificate with stated reference points.
  5. Annual recalibration is recommended — the instrument is sent to Termometer.se, which verifies and recalibrates it against reference solutions.

Specifications

  • Scales: 2 custom factory-calibrated.
  • Configuration: any chemical substance, concentration range, unit, reference temperature.
  • Precision: typically ±0.1% of measurement range (determined by the quality of the calibration references).
  • Automatic temperature compensation (ATC) 0-50 °C.
  • Calibration: distilled water (nD = 1.3330).
  • Sample well: titanium (corrosion-resistant).
  • Display: 2-line backlit LCD.
  • Measurement time: 2-3 seconds.
  • Lead time: 2-4 weeks for factory calibration.

What you get for your money

Palm Abbe digital refractometer with 2 custom scales (MISCO PA202X series), factory-programmed for specific chemical substances per customer specification, titanium sample well for corrosion resistance, automatic temperature compensation 0-50 °C, calibration with distilled water, 2-line backlit LCD, 2-3 second measurement. 5,527 SEK.

The standard tool for chemical industry, pharmaceuticals, surface treatment, semiconductor manufacturing, nuclear power, clinical medicine, and other applications where the process liquids are NOT found in standard Brix tables. The premium over a fixed Brix refractometer is justified when measurements must be made in UNIQUE chemicals without requiring manual table lookup or a separate calculation tool. Factory calibration means even staff without chemical expertise can use the instrument correctly.

Read more: Digital refractometer with 2 custom scales in the shop →

More news

All news